To Download the latest Norhof Pump Monitor program, ver. 8.63 febr-2023
click HERE (=NorhofPumpMonitor863.zip) to download the zip file
IMPORTANT: The Zip file should be unpacked directly on an USB stick, and later run from this USB stick OR directly on C: in a temporary folder.
further instructions:
go with explorer to the USBstick, or to your C: folder and run the setup.exe
Note that this version 8.63 can be used for all pumps since version 7.36. If you are installing the 8.63 version to replace an older software version then please make sure that the original monitor software and driver is removed first.
Be careful with older pumps. This version can read the data, but may not work correctly when putting parameters into the pump, so do not do that. Please then use the original version supplied with that pump.
When there is no COM port available on the computer, it will give warnings, and will stop.
When there is a com port, and no pump connected, it will search com port 1 to 16 for the pump, will not find the pump, and will ask you to continue without a pump 3 times. But then the program should start, but with most options empty on screen, because there is no pump connected.
To download the latest Norhof 915 utils, ver. 8.63 1-3-2020
click HERE (=915utils.zip) to download the zip file